Info Tips How to drive automatic cars and motorbikes

 

Automatic cars do have different characteristics from manual transmissions, including how to brake. Automatic cars have special techniques, especially when crossing downhill roads. that a car with automatic transmission should not only rely on the brakes when passing through steep descents. According to him, it needs to be assisted with engine brakes to maximize and reduce wear on certain components. Also read: Here's the Safe Technique for Driving a Motorcycle Using a Box "It is recommended that a car with an automatic transmission occurs when a steep descent uses a low gear. If you only step on the brakes, the only thing that holds the load and stops the car is the brake system, not assisted by the engine. If you step on the brake pedal for too long, it is feared that a vapor lock will occur or a condition where the brakes become hot, the brake fluid will boil. Didi explained, when it boils, brake fluid will cause water vapor which can cause brake failure. Thank you for reading Kompas.com. Get information, inspiration and insights in your email. Register an email. "It is feared that if you apply the brakes continuously, the condition will become hot and something called vapor lock will occur," he said. Meanwhile, he said, in automatic cars, the engine brake facility is usually in the low gear. It can be on L, and on some automatic types it is in lever position 2. Also read: Beware of Overload, Here's How to Calculate the Maximum Weight of a Car "How to use the engine brake simply move the lever from D to 2 or L, this should be done at low speed . For example, the lever is shifted when the car's speed is not more than 30 km per hour (Kpj), so as not to cause overspeed. Then just adjust the brakes. So, for drivers who usually drive a car with a manual transmission, when switching to automatic, you should first understand the procedure for an automatic transmission car. Because not a few people have accidents because they are not used to it. Position View Photo Lock button or release button on the automatic transmission lever () Driving a car with an automatic or automatic transmission is considered practical. This is because the driver does not need to be bothered by stepping on the clutch and shifting gears frequently, as in a car with a manual transmission. Including when you are stopped at a red light or anywhere else. However, it turns out that many people think that when an automatic car stops, the gear position must be shifted to N (Neutral). In fact, the position of the gear lever in D when stopped due to traffic jams or at a red light, does not cause damage to the transmission components. "The transmission system in the gearbox will automatically stop moving when the car stops, even though the lever position is in D in that condition, it's natural to feel a jolt. Because the engine speed at idle is enough to produce enough oil pressure to the transmission to make the car move. That's normal, but only for a moment. Clutch rubbing when the car stops will not cause the transmission to break, because it has no significant effect. 

The case of an automatic motorcycle experiencing a failed brake on a downhill road is not a new thing.

Before the Instagram account agoez-bandz uploaded a video of two children having an accident while riding an automatic motorbike on the derivative, this case often happened.

Usually because the driver presses the brakes for too long and forces, so that the disc and brake pads heat up quickly.

The heat generated due to the friction of the two components can spread to the calipers and can make the piston seal expand. As a result, the piston becomes stuck and can't press the canvas.

Therefore, when passing through derivatives, automatic drivers need to pay attention to the correct way of driving so that the brakes do not fail easily.

"When you want to brake on a downhill road, just close the gas slowly so that the motorbike doesn't slip and remains easy to control,

In addition, try to use the front brake first, followed by the use of the rear brake so that the motor remains stable.

What needs to be considered again, try to reduce the speed of the vehicle from a distant braking point. This can avoid hot brake symptoms, due to sudden braking in full.

After knowing how to brake, don't forget to always wear safety devices such as helmets, gloves, and jakets.